It is possible to switch automatically to open loop mode for lower speeds and for positioning purposes. Open the attribute in the Filter. Filter the matching motors using the attributes “Torque” and “Thrust”. Current per Winding 9. The sound solutions and advice provided by the engineers of All Drives and Controls are just a small part of the full service supplier support offered for Nanotec stepper motors. The virtual encoder value, in contrast, is continuous and constant.
|Date Added:||28 June 2014|
|File Size:||42.16 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
You can select up to 6 products for a torque curve comparison. The motor required is a NEMA34 with torque range from 3. Different motors can have identical torque curves. The customer was provided with the speed torque curve for the motor to get around RPM with a usable torque of 1Nm.
How to use the product finder Product Finder Instructions. Use more attributes to filter and to find the right combination for your requirements.
Each color represents a motor. They will appear as only one curve.
IP65 Stepper Motors
It is possible to switch automatically to open loop mode for lower speeds and for positioning purposes. Pre-assembled cables permit quick and error-free wiring and commissioning. No, stay on site OK. Is a suppression capacitor needed when running a system from a battery? Filter the matching motors using the attributes “Torque” and “Thrust”. Available in four lengths and a variety of In this way the stepper motor operates as a servo motor — without step losses, without resonances and without the risk of overheating.
Some attributes have similar names but are used for different kinds of products.
The nanktec will work without an encoder. Even in these cases, motor-dependent threshold values must be recognized and configured. Especially at low resolutions, this leads to synchronization fluctuations of the motor.
Stepper motors | Hollowshaft motors
Another important aspect regarding the practical use of a sensorless controller is the identification of the parameters of the model. They will appear as only one curve. You can select up to 6 products for a torque curve comparison.
Click on the attribute name in order to sort in ascending or descending order. Regarding the step type, operating in the clock direction mode enables the PLC to have full command. In this way the stepper motor operates as a servo motor — without step losses, without resonances and without the risk of overheating.
In the shopping cart you will find the “Request a quote” button. The Results will adjust themselves automatically to the values you have set.
Current per Winding 1. This trend has been halted and even reversed in recent years by the development of field-oriented closed loop controlled stepper motors.
They have a high torque and, depending on the series, speeds between and rpm. Available in three lengths.
IP65 Stepper Motors | NANOTEC
Najotec attribute is being reset. They will appear as only one curve. Even below this threshold value, sensorless control still operates down to approx. Thus, sensorless technology makes it possible to benefit from the advantages of field-oriented control in almost all traditional stepper motor applications.
No, stay on site OK.
Ideal for precise positioning and closedloop applications.